'Industrial Engineering and Operations Research - New Books' 按 UCBEngiLib

OECD Nuclear Energy Agency. (2008). Nuclear energy outlook 2008. Paris: Nuclear Energy Agency, Organisation for Economic Co-operation and Development.

Papadopoulos, C. T. (2009). Analysis and design of discrete part production lines. New York: Springer-Verlag.

Kutz, M. (2009). Environmentally conscious materials handling. Hoboken, N.J.: Wiley.

National Research Council (U.S.). (2009). Beyond "fortress America": National security controls on science and technology in a globalized world. Washington, D.C.: National Academies Press.

National Research Council (U.S.). (2009). The New Orleans hurricane protection system: Assessing pre-Katrina vulnerability and improving mitigation and preparedness. Washington, D.C.: National Academies Press.

Ficalora, J. P., Cohen, L., & Cohen, L. (2010). Quality function deployment and Six Sigma: A QFD handbook. Upper Saddle River, NJ: Prentice Hall.

National Academies (U.S.). (2009). On being a scientist: A guide to responsible conduct in research. Washington, D.C.: National Academies Press.

Boyer, K. K., & Verma, R. (2010). Operations & supply chain management for the 21st century. Mason, OH: South-Western.

Baker, K. R., & Trietsch, D. (2009). Principles of sequencing and scheduling. Hoboken, N.J.: John Wiley.

Young, S. T. (2009). Essentials of operations management. Thousand Oaks: Sage Publications.

Meyer, H., Fuchs, F., & Thiel, K. (2009). Manufacturing execution systems: Optimal design, planning, and deployment. New York: McGraw-Hill.

Stephens, M. P., & Meyers, F. E. (2010). Manufacturing facilities design and material handling. Boston: Pearson Prentice Hall.

Slack, N. (2009). Operations and process management: Principles and practice for strategic impact. Harlow, England: Prentice Hall/Financial Times.

Box, G. E. P., Luceño, A., & Paniagua-Quiñones, M. d. C. (2009). Statistical control by monitoring and adjustment. Hoboken, N.J.: John Wiley & Sons.

ASME International Conference on Manufacturing Science and Engineering. (2009). Proceedings of the ASME International Manufacturing Science and Engineering Conference, 2008: Presented at 2008 ASME International Manufacturing Science and Engineering Conference, October 7-10, 2008, Evanston, Illinois, USA. New York: American Society of Mechanical Engineers.

Smith, C. L. (2009). Basic process measurements. Hoboken, N.J.: Wiley.

Ong, S. K., Nee, A. Y. C., & Xu, Q. L. (2008). Design reuse in product development modeling, analysis and optimization. Hackensack, NJ: World Scientific Publishing.

King, P. L. (2009). Lean for the process industries: Dealing with complexity. Boca Raton: CRC Press.

Curry, G. L., & Feldman, R. M. (2009). Manufacturing systems modeling and analysis. Berlin: Springer-Verlag. http://dx.doi.org/10.1007/978-3-540-88763-8.

Lindemann, U., Maurer, M., & Braun, T. (2009). Structural complexity management: An approach for the field of product design. Berlin: Springer.

Niku, S. B. (2009). Creative design of products and systems. Hoboken, N.J.: Wiley.

International Conference on Advanced Ceramics and Composites, Lin, H.-T., Zhu, D., Ohji, T., & Wereszczak, A. (2008). Advanced ceramic coatings andiInterfaces III: A collection of papers presented at the 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008, Daytona Beach, Florida / editors, Hua -Tay Lin, Dongming Zhu ; volume editors, Tatsuki Obji, Andrew Wereszczak. Hoboken, N.J.: Wiley-Interscience.

Laudon, M., Laird, D. L., & Romanowicz, B. F. (2008). Clean Technology 2008: Bio energy, renewables, green building, smart grid, storage, and water. Boston: Clean Technology and Sustainable Industries Organization.

Sule, D. R. (2009). Manufacturing facilities: Location, planning, and design. Boca Raton: CRC Press.

Gross, D., & Gross, D. (2008). Fundamentals of queueing theory. Wiley series in probability and statistics. Hoboken, N.J.: Wiley.

Depla, D., & Mahieu, S. (2008). Reactive sputter deposition. Springer series in materials science, 109. Berlin: Springer.

Murthy, D. N. P., Rausand, M., & Østerås, T. (2008). Product reliability: Specification and performance. Springer series in reliability engineering. London: Springer.

Klingender, R. C. (2008). Handbook of specialty elastomers. Boca Raton: CRC Press.

Hosford, W. F., & Caddell, R. M. (2007). Metal forming: Mechanics and metallurgy. New York, NY: Cambridge University Press.

Park, S. H., & Antony, J. (2008). Robust design for quality engineering and Six Sigma. Singapore: World Scientific.

Jarvis, J. (2008). Holonic execution: A BDI approach. Berlin: Springer.

Johnson, G. F. (2008). Deliberative democracy for the future: The case of nuclear waste management in Canada. Studies in comparative political economy and public policy, 29. Toronto: University of Toronto Press.

International Conference on Brownfield Sites: Assessment, Rehabilitation, and Development, Brebbia, C. A., & Beriatos, E. (2008). Brownfield sites IV: Prevention, assessment, rehabilitation and development of brownfield sites. WIT transactions on ecology and the environment. Southampton: WIT.

Bejan, A., & Lorente, S. (2008). Design with constructal theory. Hoboken, N.J.: John Wiley & Sons.

Samson, D., & Singh, P. (2008). Operations management: An integrated approach. Cambridge: Cambridge University Press.

International Organization for Standardization, & Technical Committee ISO/TC 207, Environmental management. (2006). Environmental management: Life cycle assessment : requirements and guidelines = Management environnemental : analyse du cycle de vie : exigences et lignes directrices. Geneva: ISO.

Yoder, P. R. (2008). Mounting optics in optical instruments. Press monograph. Bellingham, Wash: SPIE.

Maradudin, A. A., Méndez, E. R., & Leskova, T. A. (2008). Designer surfaces. Amsterdam: Elsevier.

Nash, M. A., & Poling, S. R. (2008). Mapping the total value stream: A comprehensive guide for production and transactional processes. Boca Raton: CRC Press.

IEEE/IFIP International Conference on Information Technology for Balanced Automation Systems in Manufacturing, & Azevedo, A. (2008). Innovation in manufacturing networks: Eighth IFIP International Conference on Information Technology for Balanced Automation Systems, Porto, Portugal, June 23-25, 2008. New York: Springer.

Günther, O., Kletti, W., & Kubach, U. (2008). RFID in manufacturing. Berlin: Springer.

Artigues, C., Demassey, S., & Neron, E. (2008). Resource-constrained project scheduling: Models, algorithms, extensions and applications. Control systems, robotics and manufacturing series. London: ISTE.

Crossley, M. L. (2008). The desk reference of statistical quality methods. Milwaukee, Wis: ASQ Quality Press.

Wisner, J. D., Tan, K.-C., & Leong, G. K. (2009). Principles of supply chain management: A balanced approach. Mason, OH: South-Western Cengage Learning.

Tokhi, M. O., & Azad, A. K. M. (2008). Flexible robot manipulators: Modelling, simulation and control. Control engineering series, 68. London: Institution of Engineering and Technology.

International Conference on Advanced Ceramics and Composites, Schulz, U., Hua-Tay, L., Salem, J., & Zhu, D. (2008). Advanced Ceramic Coatings and Interfaces II: A collection of papers presented at the 31st International Conference on Advanced Ceramics and Composites, January 21-26, 2007, Daytona Beach, Florida. Hoboken, N.J.: Wiley-Interscience.

Mangan, J., Lalwani, C., & Butcher, T. (2008). Global logistics and supply chain management. Chichester, England: John Wiley & Sons.

Heragu, S. S. (2008). Facilities design. Boca Raton, FL: CRC Press.

Legault, A. (2008). Oil, gas and other energies: A primer. Paris, France: Éditions Technip.

Montgomery, D. C. (2009). Introduction to statistical quality control. Hoboken, N.J.: Wiley.

Lopez, P., & Roubellat, F. (2008). Production scheduling. Control systems, robotics and manufacturing series. London: ISTE.

Amekudzi, A. A., & McNeil, S. (2008). Infrastructure reporting and asset management: Best practices and opportunities. Reston, Va: American Society of Civil Engineers.

I*PROMS Virtual Conference, Pham, D. T., Eldukhri, E. E., & Soroka, A. J. (2008). Innovative production machines and systems: Third I*PROMS Virtual Conference, 2nd-13th July 2007. Dunbeath, Scotland: Whittles.

Gonçalves, M., & Porter, B. E. (2008). Global management strategies: Sales, design, manufacturing and operations. New York: ASME Press.

Gonçalves, M. (2008). Conflict resolution: Concepts and practice. New York: ASME Press.

Williams, F. M., & Emerson, C. J. (2008). Becoming leaders: A practical handbook for women in engineering, science, and technology. Reston, Va: American Society of Civil Engineers.

Ulrich, K. T., & Eppinger, S. D. (2008). Product design and development. Boston: McGraw-Hill Higher Education.

Mohitpour, M. (2008). Energy supply and pipeline transportation: Challenges and opportunities : an overview of energy supply security and pipeline transportation. New York: ASME Press.

BPM 2007, Ter Hofstede, A., Benatallah, B., & Paik, H.-Y. (2008). Business process management workshops : BPM 2007 international workshops, BPI, BPD, CBP, ProHealth, RefMod, semantics4ws, Brisbane, Australia, September 24, 2007 : revised selected papers. Lecture notes in computer science, 4928. Berlin: Springer.

Straube, F., Ma, S., & Bohn, M. (2008). Internationalisation of logistics systems: How Chinese and German companies enter foreign markets. Berlin: Springer.

Wang, L., & Xi, J. (2008). Smart devices and machines for advanced manufacturing. London: Springer.

Kiel, E. (2008). Drive solutions: Mechatronics for production and logistics. Berlin: Springer.

Li, E. Y.-z., & Yuan, S.-T. (2008). Agent systems in electronic business. Hershey, PA: Information Science Reference.

Coleman, R. (2007). Design for inclusivity: A practical guide to accessible, innovative and user-centred design. Aldershot: Gower.